How to Recruit and Develop AI Talent in Thailand: From Skill Definition to Evaluation Systems

How to Recruit and Develop AI Talent in Thailand: From Skill Definition to Evaluation Systems

Lead Section

To secure talent who can drive AI adoption at Thailand bases, companies need to articulate their purpose and scope of operations, then design skill definitions, hiring criteria, development plans, and evaluation systems as a single, connected flow. This article is aimed at HR and DX personnel at Japanese companies with Thailand bases, and organizes the practical steps from Step 1 (skill definition) through Step 2 (hiring criteria and selection process), Step 3 (development plan), to Step 4 (evaluation system). By the end, you will have a starting point for translating the AI talent your company needs into an expectation table by position, and for designing a consistent operation spanning hiring, development, and evaluation.

Before finalizing skill definitions and hiring criteria, you first need to articulate for what purpose and in what scope of operations your company will introduce AI. If the purpose and scope remain ambiguous when creating talent requirements, the role and actual work will diverge after hiring, and the development plan will also miss the mark.

Clarify the Purpose of Promoting AI Utilization

The talent profile required varies greatly depending on whether the goal is operational efficiency, new service creation, or quality improvement. If the goal is operational efficiency, the focus shifts to talent who can automate existing operations and improve the accuracy of routine processing; if the goal is new service creation, talent who can plan and build new models or products becomes necessary. If this distinction is not clearly documented, the subsequent skill definitions and hiring criteria will fail to align with the purpose.

When determining the purpose, it helps to specify three things concretely: the "user group" who will benefit from the results, the "level of expertise" required, and the "governance requirements." Governance requirements refer to constraints around data handling and ethics; for operations that require compliance with Thailand's PDPA (Thailand's Personal Data Protection Act), talent requirements must also include knowledge of data handling.

Breaking down the purpose should not be a one-time exercise—you should return to it when designing the scope of operations and evaluation criteria. For example, for the purpose of "improving customer service efficiency," writing out each of the three elements in a single sentence—user group: in-house operators, level of expertise: practical operational level, governance requirements: anonymization of customer data—will make it easier to create hiring criteria later.

When pursuing multiple purposes simultaneously, rather than narrowing down to a single priority, it is effective to create separate sets of user group, expertise level, and governance requirements for each purpose. Even when multiple tasks are tied to a single purpose, writing out these three elements separately by task helps prevent misalignment between responsible departments regarding "for whom, and what, are we building." It is also essential that the articulation of purpose not be completed by HR personnel alone, but be agreed upon with on-site managers before moving on to defining the scope of operations.

Define the Scope of Business Operations Covered

By classifying the scope of operations by task—such as "decision support/automation," "customer service," "predictive models," and "image processing"—and setting outcome metrics for each, it becomes easier to translate them into talent requirements. The approach of mapping tasks to the required capabilities is a common way to organize the process of translating scope of operations into talent requirements. If you define scope at the level of "talent who can use AI" without breaking it down by task, it becomes unclear whether the required skills are for image processing or customer service, making it impossible to create hiring criteria.

In addition to classifying by task, data and infrastructure requirements—such as data location, access rights, and privacy—must be included in the definition of the scope of operations. For example, if the target operation is automating customer service, the depth of data-handling knowledge and understanding of the PDPA (Thailand's Personal Data Protection Act) required of the hired talent will differ depending on whether the data used comes from an internal customer database or consists solely of public information. For predictive models, including the update frequency of training data and the method of accuracy verification in the scope definition will make creating evaluation criteria easier later on.

Defining the scope of operations should be done at the same unit as the articulation of purpose to maintain consistency. When multiple tasks are tied to a single purpose, it is important to write out outcome metrics and data requirements separately for each task, and to clarify who will be responsible for which task, before moving on to skill definition. If tasks are divided too coarsely, operations that actually require different skills end up mixed into a single job description, so tasks should be broken down at least to the point where outcome metrics differ.

Step 1: How Should You Define the Skills Required of AI Talent?

Step 1: How Should You Define the Skills Required of AI Talent?

Once the scope of operations and tasks are fixed, write out the skills required for each, divided into three elements: "knowledge," "practical skill," and "attitude." If technical ability and business understanding are mixed together in a single job description, both hiring criteria and development plans tend to miss the mark, so defining each element separately is the starting point.

Separate Technical Skills from Business Understanding

Technical skills refer to hands-on practice of handling the model itself, such as data processing and model building with Python and the design of evaluation metrics. Business understanding refers to the ability to grasp KPI design for the target business, on-site decision-making processes, and business flows specific to the Thailand location, and these two must be treated as separate evaluation axes. Hiring someone who excels at only one of these tends to lead to a situation where either a highly accurate model is built but cannot be implemented in the business, or the person has business knowledge but keeps relying on outside parties for implementation.

When creating a job description, write out hands-on items such as "data preprocessing with Python" and "selection of model evaluation metrics" in the technical skills column, and items such as "KPI setting for the target task" and "requirement coordination with on-site departments" in the business understanding column, keeping them separate. The OECD's skill classification also presents the idea of defining knowledge, practical skills, and attitude separately, and handling technical skills and business understanding without mixing them together is a method consistent with this classification.

Writing the two aspects separately makes it easier to identify which one is lacking at the time of hiring. For a candidate who scores high on the technical test but scores low on a case study that tests business understanding, you can make a decision such as incorporating reinforcement of business understanding as a priority in the post-hire development plan. Conversely, for a candidate who has strong business understanding but still shows uncertainty in basic coding or evaluation metric selection on the technical test, you assign them to a development plan that prioritizes technical training.

This way of separating the two needs to have its weighting changed as job levels rise. For members in charge of implementation, the weight on technical skills should be higher, while for those in positions leading a team, the weight on business understanding and governance compliance should be higher. Linking this directly to the design of expectations for each job type and level keeps the axis of judgment consistent across both hiring criteria and development plans.

Set Expectations by Job Role and Level

After dividing the job description into technical skills and business understanding, organize by job level how expectations change depending on the role taken on, even for the same work. As a practical example of organization, dividing even within a company into layers makes it easier to translate this into both hiring criteria and development plans.

In practice, expectations are written out separately across roughly four layers: AI user, applied data analyst, ML engineer, and lead AI engineer.

LevelTechnical Skill ExpectationsBusiness Understanding Expectations
AI userOperating existing tools, reading resultsUnderstanding of own department's business flow
Applied data analystData preprocessing, basic model evaluationParticipation in KPI design
ML engineerModel building/implementation, design of evaluation metricsRequirement coordination across multiple departments
Lead AI engineerOverseeing operation of multiple modelsDesign of governance compliance, cross-departmental priority decisions

This table should be created in correspondence with the scope of work defined per task. When multiple tasks are tied to a single job level, noting in the job description that expectations change by task clarifies the interview questions used in hiring and the priority areas for the development plan.

Step 2: How Should You Design Hiring Criteria and the Selection Process?

Step 2: How Should You Design Hiring Criteria and the Selection Process?

Unless the technical skills and business understanding defined in the job description are verified separately at each stage of the selection process, it is not possible to identify candidates who match the expectations for each job level. What to look for at each stage, from document screening through the technical test to interviews, needs to be designed in advance, and conditions specific to the local area must also be checked together.

Key Points to Check for Local Hiring

For the salary range, the labor cost materials in "Costs of Doing Business" published by the BOI (Thailand Board of Investment) allow you to check monthly pay bands by job type. According to the latest version of Costs of Doing Business published by the BOI, reference values for Data Scientist show an upper band of roughly 120,000–200,000 baht per month, and a practical approach when setting hiring criteria is to use this published range as a baseline and adjust it according to the candidate's years of experience, the scope of the tasks they will handle, and their work location. Because salary bands differ significantly among applied data analysts, ML engineers, and lead AI engineers, budgets need to be set in conjunction with the expectation table for each job level. Note also that the content of this material is updated depending on the year of publication, so when creating hiring criteria, you need to check the publication year of the version you are referencing and confirm whether it is the latest edition.

Regarding working conditions, the BOI's materials also present, in summary form, the premium-pay standards for holiday work, late-night work, and overtime. AI projects tend to see workload concentrate before deadlines, and if you anticipate a scope of work involving overtime or holiday response, you should check these premium-pay standards before presenting hiring terms, and make sure there is no discrepancy with what is written in the employment contract.

For local hiring, selection criteria should also include not just the level of technical skill but also whether Thai or English will be used to evaluate business understanding and conduct internal communication. For positions that involve a lot of interaction with personnel on the Japan side, explicitly stating language conditions in the business understanding evaluation items, and checking them separately from the technical test, helps prevent mismatches after hiring.

Judgment Criteria for Interviews and Practical Tests

Verifying technical ability is most effective when done in a setting where the candidate actually writes code. Choose one of: an actual coding test using Python or SQL, a live demonstration of data preprocessing, or a take-home model evaluation assignment, and judge based on the code the candidate actually writes. Simply having the candidate say verbally "I have experience" does not let you confirm the reasoning behind their choice of evaluation metrics or the basis for their preprocessing decisions, so always include at least one hands-on task.

In the case interview, emphasize the connection to the business more than technical accuracy. Have the candidate explain, in their own words, everything from problem definition to the design of evaluation metrics, and check whether they can answer "when this model's accuracy improves, which business KPI gets better as a result?" Even if a candidate has high technical skill, failure to make this connection becomes a factor for lowering their evaluation for positions at the applied data analyst level and above.

When confirming implementation and operational ability, don't stop at just building a model—ask specifically about experience putting a model into a production environment and experience building data pipelines. Also, always ask "how did you measure the results of that initiative?" and judge the operational ability expected for positions at the ML engineer level and above based on whether they can explain even the measurement method.

It is also essential to vary the difficulty and weighting of tasks by job level. For hiring at the AI user layer, a task that looks at reading results using existing tools and making business judgments is sufficient, but at the lead AI engineer layer, add tasks that probe judgment related to overseeing the operation of multiple models and ensuring governance compliance. For candidates whose technical test results and case interview results conflict, deciding in advance, based on the expectation table for each job level, which evaluation to prioritize helps reduce variation in judgment among different interviewers.

Step 3: How Should You Build a Training Plan?

Step 3: How Should You Build a Training Plan?

The skill gaps that recruitment cannot fill are addressed by the training plan. By using the gap against the expectation table for each position as the criterion for selecting training materials, and by designing the process not just around training but through to retention in actual projects, only then do outcomes emerge that can be reflected in the evaluation system.

How to Choose Training Programs and Materials

The criterion for selecting training materials is whether they can close the gap against the expectation table for each position. Before adopting any material, you first decide which of the two categories—technical skills or business understanding—it is meant to supplement, and then confirm that its content matches that category.

For materials that supplement technical skills, prepare both types: ones that allow systematic classroom learning of AI principles and evaluation metric concepts, and ones that include hands-on exercises. For the AI user tier, short courses focused on operating business tools and interpreting results are appropriate, while for ML engineers and above, materials covering the design of evaluation metrics and the limitations of models are needed. For materials covering data preprocessing or model building in Python, check whether they include exercises of the same type as the actual coding tasks used in candidate screening—doing so allows post-training ability to be measured on the same scale as the screening criteria.

Public training resources should also be considered as candidates for materials. Talent development programs such as Super AI Engineer, run by NSTDA (National Science and Technology Development Agency of Thailand), can sometimes supplement training at a level of technical skill that in-house materials alone cannot reach. Materials for developing business understanding—that is, domain knowledge and business KPI design—should be prepared separately from technical skill materials, and mapped to the business understanding axis of the evaluation system so that the training plan and the evaluation axes do not drift apart.

Before introducing a training material, cross-check the items listed in the expectation table for the target position against the material's syllabus line by line. If any gaps remain, decide whether they can be filled by another module within the same material or whether an additional material is needed, and also check whether difficulty adjustments are required when reusing the same material across different positions.

Mechanisms for Embedding Skills Through On-the-Job Practice

Knowledge and skills learned in training only take root once they are put into actual projects. The core of a training plan that does not end with training alone is to place trainees in small-scale pilot tasks and gradually expand only the areas where results have been confirmed. The target tasks for the pilot should be chosen in line with the expectation table for each position. For an applied data analyst, assign tasks that require participation in KPI design; for an ML engineer, assign tasks that require model building and the design of evaluation metrics—and confirm that the role played in the actual project matches the items that the training materials were meant to supplement.

During the pilot, set up a structure in which employees or external specialists who have previously handled the same work act as mentors, giving feedback each time on the reasoning behind decisions and how evaluation metrics were chosen. Rather than being a one-time event, feedback should be built into a recurring mechanism at every milestone of the work, which allows gaps in knowledge or errors in practical judgment to be corrected at an early stage. During the pilot period, it is also essential to keep the success metrics fixed to those decided when the scope of work was defined, without changing the criteria midway. If the criteria are changed, it becomes impossible to tell whether the trainee's ability has actually improved or whether only the way of evaluating has changed.

The insights gained from the pilot should not remain as an individual's personal experience; a venue should be set up to share them with other members in the same position. Repeating this internal sharing of insights leads not only to retention for the individual trainee but also to an improvement in the ability of the whole team, and it also becomes performance data that can be referenced when designing the next evaluation system.

Step 4: How Should This Be Reflected in the Evaluation System?

Step 4: How Should This Be Reflected in the Evaluation System?

Outcomes confirmed as retained through the training plan do not become material for decisions on salary or promotion unless they are carried over into the axes of the evaluation system. The starting point for designing the evaluation system is to transcribe the expectation table for each position directly into the evaluation sheet, and to carry over the success metrics measured through training into the five evaluation axes: technical skills, business understanding, impact, governance compliance, and learning attitude.

Align Evaluation Criteria with Skill Definitions

The items on the evaluation sheet carry over directly from the two-category skill definition that separates technical skills and business understanding, and are organized into five axes by adding impact, governance compliance, and learning attitude. The technical skills axis evaluates practical items such as code implementation and the design of model evaluation metrics, while the business understanding axis evaluates participation in KPI design and requirement coordination with on-site departments. If these two categories are mixed into a single item, a person who is technically strong but cannot implement their skills in the business, and a person who understands the business but continues to rely on external parties for implementation, end up being treated under the same evaluation—obscuring where the focus of training should be.

The impact axis directly uses the achievement level of the success metrics set at the stage when the scope of work was defined. The governance compliance axis covers data handling and the state of compliance with PDPA (Thailand's Personal Data Protection Act), while the learning attitude axis looks at the degree of participation in the improvement cycle during pilot tasks.

The weighting of the five axes should be mapped to the expectation table for each position. For the AI user tier, weight business understanding and learning attitude more heavily; for the ML engineer tier, weight technical skills and impact more heavily; for the lead AI engineer tier, weight governance compliance more heavily—reflecting the differences in expectations separated out in the job description directly into the scoring allocation on the evaluation sheet.

When varying the point allocation by position, the full-score standard for the same axis must still be kept consistent. For the technical skills axis, for example, the scoring perspectives themselves—such as "code readability" and "grounds for selecting evaluation metrics"—should remain common across all positions, with only the required level of achievement varying by position. This way, evaluation histories can still be compared even when someone transfers between positions.

Mechanisms for Feeding Evaluation Results Back into Training Plans

If you don't establish a procedure to feed axes that scored low on the evaluation sheet back into the material selection for the next development plan, the evaluation ends up merely as a record with no further effect. Documenting the cycle of evaluation → development → re-evaluation, and directly linking the evaluation results to investment in learning and retraining, is the practical baseline.

Specifically, if an item on the technical skills axis fails to meet the standard, you re-compare it against the expectation table for each job grade to identify the gap, and incorporate materials that can close that gap into the next development plan. If the business understanding axis is low, you review the person's role in pilot projects and reassign them to work with greater involvement in KPI design, changing the practical setting to match the evaluation item. If the governance compliance axis is low, limit the response to materials that address attitude and increased mentoring frequency, handling this separately from technical training.

Which axis to prioritize for feedback is determined according to the weighting assigned to each job grade. For the ML engineer level, close the gap in technical skills and impact first; for the lead AI engineer level, close the gap in governance compliance first. Deciding this order in advance, in line with the scoring on the evaluation sheet, keeps priorities stable even when the development budget is limited.

This cycle should not end after a single pass; it should be operated as a system where the same axis is re-measured in the next evaluation cycle to confirm whether improvement has occurred. For axes where no improvement is confirmed upon re-evaluation, determine whether the cause lies in the materials themselves or in the assigned work, and use this as the basis for revision.

What Are Common Pitfalls in Hiring and Training?

What Are Common Pitfalls in Hiring and Training?

Even after putting in place an expectation table for each job grade and an evaluation cycle, the designed system fails to function if hiring proceeds with requirements that remain too coarse, or if development is deemed complete the moment training is conducted. Failure arises from the gaps between definition and practice.

Hiring Without Clear Skill Definitions

In Thailand's talent market, it is often pointed out in internal hiring practice that the pool of people who can handle AI at a high level is thin. If hiring proceeds with vague requirements, applications may come in but the substance of their skills cannot be verified, making it easy for mismatches to surface after hiring. A typical case is placing someone who has strong technical skills but cannot connect them to business KPIs into a position that requires business understanding.

Letting Training End with Classroom Sessions Alone

An approach that treats development as complete the moment training is conducted, and moves people on to the next job grade without building in deployment to real projects or a feedback mechanism, results in knowledge and practical skills that fail to take root and are nonetheless reflected in the evaluation system. Even if someone learns how to design evaluation metrics through classroom instruction or a short course, without a place to repeatedly exercise judgment using actual business data, they cannot even maintain the level confirmed in the technical test at the time of interview.

This failure arises from setting the completion of training as the goal of the development plan. If assignment to pilot work and ongoing feedback from mentors are not included in the plan, and things are left to the field after training, knowledge may be supplemented, but the entry into the evaluation cycle happens without confirming that practical skills and attitude have taken root. As a result, a mismatch tends to arise in which the technical skills axis on the evaluation sheet scores high, while the business understanding and impact axes continue to receive low evaluations.

In companies that have not concretized the bridge from training design to practice, there are cases where the correspondence between classroom content and on-site work is not written out in the training plan, and who will use that knowledge in which tasks is not made explicit. Conducting training without this kind of clarification falls into the same trap.

The countermeasure is to decide, at the stage of planning the training, which pilot work the person will be assigned to after training and how frequently they will receive mentor feedback, setting these together as a single development plan. Switch to an operation where training alone is not treated as the completion condition, and instead the completion condition of the development plan is the point at which outcome indicators are confirmed in actual projects.

Frequently Asked Questions

Frequently Asked Questions

Let's organize the criteria for judgment regarding salary levels, the priority between reskilling and new hiring, and the frequency of reviewing the evaluation system.

Q1: How Should You Think About Salary Levels When Hiring AI Talent in Thailand?

A practical approach is to use the monthly pay ranges by job type shown in the labor cost data from the BOI (Board of Investment of Thailand)'s "Costs of Doing Business" as a baseline, then adjust for each candidate from there. Rather than presenting the baseline value as-is as the offer amount, you adjust it up or down based on the scope of tasks the candidate will handle (building predictive models versus assisting with the operation of existing tools), years of experience, and work location. If your expectation table by position separates ML Engineer and Lead AI Engineer, setting distinct monthly pay ranges for each position—rather than reusing the same baseline across both—helps prevent the standard from breaking down during post-hire salary negotiations.

Q2: Should You Prioritize Reskilling Existing Employees or Hiring New Talent?

The division is based on whether the required capability can be covered internally. A practical combination is to secure important and scarce technical skills through new hires, while cultivating capabilities tied to on-the-ground context—such as business understanding or governance compliance—through reskilling of existing employees. The decision should be made after identifying, via the expectation table by position, whether what is lacking is "technical skill" or "business understanding."

Q3: How Often Should the Evaluation System Be Reviewed?

A reasonable approach is a two-layer operation in which formal evaluation reviews are set on an annual basis, with day-to-day feedback incorporated in between. The UK CIPD (Chartered Institute of Personnel and Development)'s guidance on performance management also points to a shift away from relying solely on annual formal reviews toward an approach that builds continuous dialogue. Among the five evaluation axes, for an axis like technical skill, where change becomes visible on a half-yearly basis, short check-ins should be inserted at each milestone of pilot work; for an axis like governance compliance, which is prone to being affected by regulatory changes, reviews should be timed to align with revisions in PDPA (Thailand's Personal Data Protection Act) operations. The specific frequency needs to be determined by each organization according to the length of its development plan cycle and the weighting assigned to each position—a practical division being, for example, shorter cycles for the ML Engineer tier, where technical skill carries greater weight, and reviews timed to regulatory changes for the Lead AI Engineer tier, where governance compliance carries greater weight.

Summary

Summary

Recruiting and developing AI talent begins with the preliminary work of articulating the purpose and scope of work, followed by a flow in which Step 1 divides skills into technical skill and business understanding and translates them into an expectation table by position, and Step 2 designs hiring criteria and the selection process based on that table. In Step 3, the gap against the expectation table serves as the criterion for selecting training materials, which are then embedded on the ground through pilot work and mentoring; in Step 4, the evaluation axes are linked one-to-one with the skill definitions, running a cycle in which evaluation results feed back into the next development plan. This overall design breaks down in situations where hiring proceeds with vague requirements, or where conducting training is treated as the goal itself and the bridge to practical application is skipped—and constantly cross-checking the expectation table by position against the evaluation sheet serves as a safeguard against this.

The first thing to tackle is to write out, one by one, the purposes your company aims to achieve through AI adoption, and to begin creating an expectation table by position.

Please note that the hiring conditions, salary levels, and labor conditions in Thailand referenced in this article are subject to change due to social circumstances and regulatory revisions; when proceeding with an individual hiring plan, please confirm the latest details with local labor experts, certified social insurance and labor consultants, or local law firms familiar with local labor practices. Additionally, if compliance with the Personal Data Protection Act (PDPA) is required in connection with the collection, storage, and use of talent data, we recommend consulting a legal expert regarding specific operational methods before making decisions. The content of this article is intended to provide general information, and final decisions in individual situations should be made on the premise of confirmation with experts.

References

  1. www.boi.go.th/index.phpAccessed November 19, 2026
  2. www.boi.go.th/upload/content/Cost_of_Doing_Business_2026.pdfAccessed November 19, 2026
  3. www.gov.uk/government/publications/senior-civil-service-performance-management/…Accessed November 19, 2026
  4. www.boi.go.th/index.phpAccessed November 19, 2026
  5. www.ratchakitcha.soc.go.th/DATA/PDF/2562/A/069/T_0052.PDFAccessed November 19, 2026
  6. www.boi.go.th/en/typical_costs_of_starting_and_operating_a_businessAccessed November 19, 2026
  7. www.oecd.org/en/publications/a-skills-first-labour-market_2e1b85f0-en/full-repo…Accessed November 19, 2026
  8. www.doe.go.th/prd/download/download_by_pool_file/137139Accessed November 19, 2026
  9. www.boi.go.th/index.phpAccessed November 19, 2026
  10. www.boi.go.th/en/doing_biz_boiAccessed November 19, 2026
  11. www.chisou.go.jp/sousei/pdf/04_r3_guideline-kpi.pdfAccessed November 19, 2026

Author & Supervisor

Yusuke Ishihara

Yusuke Ishihara

Started programming at age 13 with MSX. After graduating from Musashi University, worked on large-scale system development including airline core systems and Japan's first Windows server hosting/VPS infrastructure. Co-founded Site Engine Inc. in 2008. Founded Unimon Inc. in 2010 and Enison Inc. in 2025, leading development of business systems, NLP, and platform solutions. Currently focuses on product development and AI/DX initiatives leveraging generative AI and large language models (LLMs).